The
MANUFACTURED HOUSING GLOBAL NETWORK
Home     Privacy & Security     Contact Us    
 
What do you want to know about manufactured housing?
Manufactured Housing Web Search
Home Search     Forum Search     Business Search    


Financing   Buy A Home Sell A Home Repair & Renovation Free Classifieds   Forums Books Insurance

Home Installation Services Carson City NV

The number 1 mistake in the installation of a home is bad site prep. If you don’t get this right the rest doesn’t really matter. No body wants to do it because it is the other guys job. The other guy might be the customer. If you let him botch the job then the rest still doesn’t matter. Explaining to the consumer that his home is a mess because he signed a paper that said he would do something and he didn't do it very well. I have never understood why anyone would want to put themselves in a position to knowingly be part of a messed up home.

Steve Dillon
Steve Dillon's Water Damage
530-542-3556
PO Box 7534
So Lake Tahoe, CA
 
Coursey Custom Builders Inc
(775) 884-4855
911 W King St
Carson City, NV
 
Cruz Construction
(775) 883-6161
19 Cygnet Dr
Carson City, NV
 
Acme Heating & Air Conditioning
(775) 883-3220
Acme Heating & Air Condition
Carson City, NV
 
Bartosz David Construction
(775) 883-2792
510 Stafford Way
Carson City, NV
 
John L'Etoile
JLLA Landscape Architecture
775-750-0258
14475 Huron Trail
Reno, NV
 
Brown Fred William General Contractor
(775) 882-4162
3795 Timberline Dr
Carson City, NV
 
Brooks Construction
(775) 882-8050
5225 Grumman Dr
Carson City, NV
 
Anchorage Construction Managment Inc
(775) 841-7546
3832 Sweetland Dr
Carson City, NV
 
Builders Carpet Supply, Inc.
(775) 882-4450
4949 Highway 50 East
Carson City, NV
 

Most Common Mistakes in a Setup

Most Common Mistakes in a Setup
Sun 11/30/08 09:01:33 pm
by George Porter

George PorterSomeone once said that mistakes are golden opportunities for learning.   So… If you make a mistake and you don’t get caught then you learn that you can get away with it!   This might not be what the original “Ol’ Saying” had in mind but, it is true that if no one points out the problem then how do you know you did the wrong thing?

 

With this in mind let me tell you about some common problems I have found. Now keep in mind that you can pick apart any installation if you look hard enough.   These are things that will cause very serious noticeable problems.   For instance, one too many blocks in the stack is a “violation”, but if you didn’t know it you would never have a problem from it.   Not anchored right would not fall in the same category.

 

The number 1 mistake in the installation of a home is bad site prep.   If you don’t get this right the rest doesn’t really matter.   No body wants to do it because it is the other guys job.   The other guy might be the customer.   If you let him botch the job then the rest still doesn’t matter.   Explaining to the consumer that his home is a mess because he signed a paper that said he would do something and he didn’t do it very well.   I have never understood why anyone would want to put themselves in a position to knowingly be part of a messed up home.   I guess some don’t care but either way it is the biggest problem by far and just about the easiest to avoid.   Just use the customer’s money to grade the customer’s lot correctly.   Do that and 75% of all the problems you could have had will not occur.   Here is how you do this right.   Make the water run away from all sides of the home by 10 feet and stay away.   Do not let any water get under the home, ever!   What ever it takes to do this is what should and must be done.

 

Marriage line close up is somewhere after the lot problem.   The most common problem is when you use lag screws to secure the two halves together.   First let me say that not all homes use lags and if you decide to use them where they don’t go you will really mess up the home.   Fleetwood uses an engineered beam in SOME of its homes.   It is called a TJI beam and it is made of small components but is very strong.   It looks like a wooden I beam with flanges at the top and bottom.   The top flange is definitely not big enough to absorb a 3/8 inch lag.   It will split, shatter, come apart, and generally cease to function.   Make this dumb move and you have really created a mess.   There is little to no strength in the beam when one of the flanges is destroyed and this thing holds up the roof.   It is not cheap to fix either.

This type beam and many others use straps.

Click here to read the rest of the article from mobilehome.com


© Copyright 2008 Express Network Solutions
Manufactured Housing Global Network

Page Cached @ Tuesday, 18th January, 2011 @ 02:00am

Served by checkov .xpr.com
@ 02:01:59