The
MANUFACTURED HOUSING GLOBAL NETWORK
Home     Privacy & Security     Contact Us    
 
What do you want to know about manufactured housing?
Manufactured Housing Web Search
Home Search     Forum Search     Business Search    


Financing   Buy A Home Sell A Home Repair & Renovation Free Classifieds   Forums Books Insurance

Manufactured Home Bathtub Replacements Phoenix AZ

As a general rule, replacing a bathtub is NOT considered a do-it-yourself project -- especially if your changing the type and size of the tub. Changing anything means refiguring the drainlines, vents and waterlines and that can get a bit tricky and frustrating. But if your old tub is cracked or damaged and you simply wish to replace it with the same kind, then the project becomes more manageable.

Rebath
(480) 998-8900
5915 N. Granite Reef Road
Scottsdale, AZ
Services
Shower & Bathtub Liners & Restoration
Years In Business
32
Membership Organizations
Rosie On the House Referral Network, National Association of Home Builders, American National Standards Institute, American Society for Testing & Materials

Data Provided by:
Assurance Remodeling Inc
(602) 374-6981
3532 W Saguaro Dr
Phoenix, AZ
 
Eagle Remodeling & Restoration LLC
(623) 937-9382
5626 W Cheryl Drive
Glendale, AZ
 
All About Kitchen and Bath LLC
(602) 595-9258
7403 W Solano Dr
Phoenix, AZ
 
Arbor Crest Builders
(480) 626-8698
7527 E 1st St
Scottsdale, AZ
 
Home Depot
(623) 544-1129
13760 W Bell Rd
Surprise, AZ
 
Sun Valley Resurfacing
(623) 934-2069
5230 W. Luke Ave
Glendale, AZ
 
Scottsdale Plumbing Company
(480) 945-9583
7501 E Osborn RD
Scottsdale, AZ
 
Bath Effects
(602) 391-8085
7813 W Frier Dr
Glendale, AZ
 
Triple A Integrity Plumbing
(602) 439-8425
5333 W Pershing Ave
Glendale, AZ
 
Data Provided by:

Replacing a Manufactured Home Bathtub

Replacing a Manufactured Home Bathtub
Sun 09/03/06 09:22:25 am
by Mark Bower

cracked bathtub

As a general rule, replacing a bathtub is NOT considered a do-it-yourself project -- especially if your changing the type and size of the tub. Changing anything means refiguring the drainlines, vents and waterlines and that can get a bit tricky and frustrating. But if your old tub is cracked or damaged and you simply wish to replace it with the same kind, then the project becomes more manageable.

Repair or Replace?

Most bathtubs in mobile homes are plastic. When plastic cracks or breaks, it cannot be permanently repaired like fiberglass can. If the crack isn't too bad, the best you can do is temporarily repair it by using one of two methods.

bathtub crack

First method is to purchase an epoxy repair kit. The biggest advantage of the epoxy kit is that the repair isn't as noticeable because the color somewhat matches the tub. The disadvantage is that it works best only on small cracks because any movement on big cracks can cause the crack to reappear.

Second method to repair a cracked plastic bathtub is to apply a piece of quick fix tub repair tape to seal the crack. The advantage of the tape is that it will move with the tub so the crack will not reappear (unless the crack runs). The disadvantage is that it looks somewhat gaudy but by gosh it does work!

Bathtub Facts

If you've decided to replace your bathtub, besides the size and color you will also want to understand how and why the bottom of your tub is supported. Most plastic tubs are supported in two ways -- plastic legs or styrofoam.

tub legs

Pictured to the right is a tub supported by plastic legs. If you have a sewer pipe running directly under the tub, then you will need this type of tub to make room for the pipes. The disadvantage of using a tub with legs is that the tub can creak if the subfloor under the tub isn't flat causing the legs to sit uneven. The legs have to installed into the bottom of the tub. When doing so, push them in straight or you'll risk breaking a tab that holds the legs in.

styrofoam tub supports

This photo on the right shows a tub that uses styrofoam for support rather than plastic legs. The styrofoam sits directly onto the floor. Overall, the styrofoam offers better support with way less creaks. Obviously the disadvantage is that you can't run pipes directly under the tub.

Removal of Old Tub and Surround

unhook drain

First shut off water to the bathtub. From underneath the tub, unscrew pipes from drain. This can be accomplished by either taking apart the p-trap (pictured right) or unscrewing the pipe directly from the tub drain itself. If your tub has an overflow, there will be another pipe going up the back of the tub to the overflow. In this case simply take apart the p-trap and the rest will come out with the tub.

remove tub faucet

Again, be sure the water is shut off to the tub. Next unscrew the waterline connections from the back of the faucet. Remove the nuts from the hot and col...

Click here to read the rest of the article from mobilehome.com


© Copyright 2008 Express Network Solutions
Manufactured Housing Global Network

Page Cached @ Tuesday, 18th January, 2011 @ 02:00am

Served by checkov .xpr.com
@ 02:01:59